-
●關于新廣告法聲明(07月25日)
-
●非對稱異性隧道聯絡通道冷凍法(07月24日)
-
●水泥夯土材料抗壓強度試驗及耐(08月25日)
-
●變質巖類順層邊坡破裂跡象及邊(07月25日)
-
●大體積混凝土配合比優化設計在(08月25日)
-
●粉煤灰基超高性能混凝土配合比(07月25日)
-
●地鐵車輛段檢修庫裝配式混凝土(07月24日)
-
●大型十字交叉地鐵車站結構地震(07月25日)
-
●變坡面淺埋偏壓小凈距隧道圍巖(07月24日)
-
●邯鄲富水地層深基坑支護優化和(07月25日)
-
●自密實抑溫防水復合材料在地下(08月25日)
-
●粉煤灰摻量對高層建筑筏板基礎(06月26日)
-
●基于遺傳算法的神經網絡對大體(06月27日)
-
●氯鹽漬土無側限抗壓強度及體變(06月25日)
-
●不同 ZrO2 摻量改性水(06月26日)
-
●非均勻銹蝕對建筑鋼混組合梁承(06月27日)
-
●再生微粉泡沫混凝土力學性能研(06月25日)
-
●堿激發粉煤灰-高爐礦渣粉固化(09月11日)
-
●地鐵車輛段檢修庫裝配式混凝土(07月24日)
-
●昌寧隧道豎井輔助正洞施工技術(07月03日)
-
●堅硬頂板沿空留巷充填體加固技(06月25日)
PDF全文閱讀
趙凱選1,李慧2
(1.河南水建集團有限公司,河南 鄭州450000;
2. 鄭州工商學院,河南 鄭州 450000)
摘 要:為評估高層建筑施工中剪力墻結構連梁節點的受力性能,提出了一種基于有限元數值模擬的方法。試驗結果表明,該方法能有效模擬連梁節點的實際受力狀態,試件的承載能力與軸壓比和暗支撐配筋率正相關,且隨梁端位移增加,承載力退化系數先升后降,在配筋率為1%~2%時,試件穩定性表現優異,具備良好的變形能力和延性。
關鍵詞:高層建筑施工;剪力墻結構;連梁節點;受力數值模擬;暗支撐配筋率;退化系數
中圖分類號:TU323
文獻標志碼:A
文章編號:1005-8249(2024)02-0111-06
DOI:10.19860/j.cnki.issn1005-8249.2024.02.021
ZHAO kaixuan 1, LI Hui2
( 1.Henan Water Construction Group Co.,Ltd., Zhengzhou 450000,China,
2.Zhengzhou Technology and Business University,Zhengzhou 450000, China)
Abstract: To evaluate the stress performance of shear wall structure connecting beam nodes in high-rise building construction, this study proposes a numerical simulation based method. This method connects the shear wall panel to the edge components through fishtail welding technology, sets stiffeners at the center as the origin, and uses double-sided corner welding to fix them. Select a specific connecting beam as the specimen, and use quasi-static loading technology according to JGJ/T101-2015 standard. Firstly, apply a vertical load of 300 kN, and then apply a horizontal load. Monitor the displacement and stress changes of the rod after being subjected to force using a dial gauge and strain gauge. The experimental results show that this method can effectively simulate the actual stress state of the connecting beam node. The bearing capacity of the specimen is positively correlated with the axial compression ratio and the reinforcement ratio of the hidden support. As the displacement of the beam end increases, the degradation coefficient of the bearing capacity first increases and then decreases. When the reinforcement ratio is 1%-2%, the stability of the specimen is excellent, with good deformation ability and ductility.
Keywords: construction of high-rise buildings; shear wall structure; beam joint; numerical simulation of force; reinforcement ratio of dark support; degradation coefficient
作者簡介:趙凱選(1982-),男,本科,高級工程師,主要研究方向:工程現場施工管理,土木水利類技術創新研究等。
通信作者:李慧(1982-),女,碩士,副教授,主要研究方向:混凝土結構、新型建筑材料、交通工程方面的研究等。
收稿日期:2023-10-14
冀公網安備13011002000529 技術支持:數字河北 