综合精品_淫语对白_亚洲一线二线在线观看_自偷自拍av_女m被主人虐玩调教91_青草精品视频_一乃葵在线_村上里沙在线观看_国产精品刺激_日韩精品视频免费_国产又黄又猛又粗_3d蒂法精品啪啪一区二区免费_日韩一本在线_奇米精品一区二区三区四区_日本三级黄色录像

PDF全文閱讀

陳   軍¹  ,  房朝君¹  ,  柯凌云¹  ,  李松波²

 

( 1 .  浙江大學建筑設計研究院有限公司 ，浙江 杭州 310063 ; 2.  中國建筑第七工程局有限公司 ，河南 鄭州 450000)

摘   要：裝配式混凝土建筑結構復雜，在設計梁柱墻連接節點穩定性模型時，若未考慮鋼骨和混凝土之間 的粘結滑移情況，會導致模型模擬效果不佳。為此，基于 BIM 進行裝配式建筑混凝土梁柱墻連接節點穩定性分析。拆分裝配式建筑構件，建立 BIM 模型構件庫，計算出各類構件的抗彎承載力和剪力參數；依據梁柱墻連接 節點上螺栓的使用情況，計算出連接節點承載力等相關參數；將 BIM 技術與Revit 軟件結合，輸入構件庫內的構 件參數以及連接節點參數，獲得各構件模型并組成為整體BIM 模型，分析裝配式建筑混凝土梁柱墻連接節點穩定性。結果表明：建立的模型效果好，混凝土梁柱墻連接節點穩定性模擬誤差低于 1% ,  考慮到了鋼骨和混凝土 之間的粘結滑移情況，極限荷載下模擬節點穩定的性能得到了提高，增加了穩定性。

關鍵詞：裝配式建筑 ；混凝土 ；連接節點 ；穩定性 ；BIM 模型

中圖分類號：TU375            

文獻標志碼：A           

文章編號： 1005- 8249   (2024)  05- 0087- 05 

DOI:10. 19860/j.cnki.issn1005 - 8249.2024.05 .016

 

CHEN Jun¹  ,  FANG Chaojun¹  ,  KE Lingyun¹  ,  LI Songbo²

（1 . The Architectural Design & Research Institute of Zhejiang University Co. ，Ltd. ，Hangzhou 310063 ,  China;

2. China Construction Seventh Engineering Division Corp. ，Ltd. ，Zhengzhou 450000 ,  China)

Abstract: The structure of prefabricated concrete buildings is complex, and when designing the stability model of beam column wall connection nodes, the bond slip between steel and concrete was not considered, resulting in poor simulation performance of the model. For this purpose, stability analysis of prefabricated concrete beam column wall connection nodes is carried out based on BIM models. Split prefabricated building components, establish a BIM model component library, and calculate the bending capacity and shear parameters of various components. Based on the usage of bolts on the connection nodes of beams, columns, and walls, calculate the relevant parameters such as the bearing capacity of the connection nodes. Combining BIM technology with Revit software, inputting component parameters and connection node parameters from the component library, obtaining various component models and assembling them into an overall BIM model, analyzing the stability of concrete beam column wall connection nodes in prefabricated buildings. The results show that the model established in this article has good performance, with a simulation error of less than 1% for the stability of concrete beam column wall connection nodes.Considering the bond slip between steel and concrete,the stability performance of the simulated nodes under ultimate load has been improved,thereby enhancing stability.

Keywords: prefabricated construction; concrete; connect nodes; stability; BIM model

作者簡介： 陳   軍(1982—) , 男，本科，高級工程師，研究方向：工程總承包管理 、市政建筑工程施工管理。

收稿日期：2023- 02- 28